Search

Men's Electric Jacket

KuBear's heated fleece jacket is great for keeping warm during any winter activity. This stylish new style heated jacket will warm your entire torso while working outside, going to sporting events or shoveling snow. Our coreheat7 bonded fleece jacket with wind blocking is warm, breathable...

Send Inquiry Chat Now

KuBear's heated fleece jacket is great for keeping warm during any winter activity. This stylish new style heated jacket will warm your entire torso while working outside, going to sporting events or shoveling snow.
Our coreheat7 bonded fleece jacket with wind blocking is warm, breathable and quick-drying. Classic fit with gusseted underarms keep jacket in place at speed. In-pocket heat control, water resistant weld chest pocket, telescopic cuffs and an adjustable drawcord to trap heat and seal out elements are specifically designed for the temperature of speed.

 

KuBear Core Heat 7 Battery Powered Clothing: The Core Heat 7 thermovelocity system is powered by 7V lithium ion batteries that provide mobility and warmth for any outdoor activity. Coreheat7 garments are designed to keep you warm while hunting, working, skiing, or just walking the dog.


How do I charge my KuBear 7v White Power Bank?

The light on the charger indicates charge level. When plugged in, it will be green and then should display red when connected to a battery that is not fully charged. Once the battery is fully charged, it will change back to green. Additionally, the battery displays its level of charge when the button on the battery is pressed. This light indicates the charge based on the picture displayed on the battery. Once charged, the battery should be plugged into the jacket from the cord located in the front left pocket.

 

How do I charge my KuBear 5v Grey or 7v Black Power Bank?

Connect the wall adapter, power cord, and power bank. Plug into the wall. Charge level is indicated by four lights. The number of lights illuminated indicates current charge level. If no lights illuminate, the power bank is fully discharged. If a blinking light is shown, the power bank is charging. Power level can be checked at any time by pressing the button located next to the charge lights. Once charged, the battery should be plugged into the jacket from the cord located in the front left inner pocket.

 

KuBear Microwire Heating: The Microwire system is the most durable and efficient thermo-technology platform ever developed. Products incorporating Microwire technology utilizes patented micro-sized stainless steel fibers intertwined and encased in a proprietary waterproof coating. KuBearHeat Microwire technology will provide even heating for ultimate comfort.

KuBear Core Heat 7 Volt Battery Products Include: Includes the battery and charger you need to power your KuBearHeat heated product. You may purchase additional batteries and extended-life batteries for prolonged use


How to measure for KuBearHeat Jackets and Vests properly:

The measuring process is very important and will help make sure you order the correct size.  The tape measure should fit snugly against the body. Remember, any KuBearHeat liner is meant to be worn under outerwear clothing.

Chest - Measure around the fullest area of the chest, holding tape firm and level. Hold arms out, place tape, drop arms and record measurement.

Waist - Measure loosely at your natural waistline, typically above your beltline and closer to your bellybutton.

Hips - Measure around the fullest part of seat while standing and while sitting. Record the higher number.

Outseam - Measure from the top of the waistband to the bottom of the ankle, remember pants and pant liners will lose some length when in the sitting or riding position.

Sleeve Length - Measure from the top of the shoulder bone to the bottom of the wrist bone. Measure both arms as one arm may be longer than the other. 

img06184.jpg

COREHEAT 7 INSTRUCTIONS - HOW TO POWER YOUR HEATED GEAR


Battery/Power Outlet

All garments come with a 7v Lithium Ion rechargeable battery and wall charger.

Additional 7v batteries can be purchased separately. Total battery weight: 4 ounces.

Each Battery has 4 settings and is indicated on the battery by a set of red lights:

100% (4 red lights)

75% (3 red lights)

50% (2 red lights)

25% (1 red lights)


The 7v battery holds anywhere from 28 hours of heat, depending on the setting.

2 hours at 100%

3 hours at 75%

5 hours at 50%

8 hours at 25%


Operation

Step 1: Power on by pressing and HOLDING (2-4 seconds) power button

Step 2: To change temperature, press and hold power button until LED light reflects desired setting. Power level setting can only be indicated when connected to garment.

Step 3: Check remaining battery life by disconnecting battery from product. Press and hold power button, LED indicator will show 14 LED lights to indicate remaining power (4 lights is full power).


Charging Battery

We recommend charging overnight for first charge.

Charge 100% before use (a full charge takes about 3-4 hours).

A red light will appear on wall charger when charging. If light does not change or turn on, it may still be charging, so please test the battery in product after 3-4 hours.

Maintain at least 25% power when battery is not in use.


Instructions for Silicone Switches

Step 1: Plug in fully charged battery.

Step 2: Switch will cycle through settings, this indicates switch has power and can now be used.

Step 3: To power on, push and hold down button for 23 seconds until the switch illuminates.

Step 4: To change power setting, tap button to cycle through levels.

                               ○Low = Green        ○Medium = Yellow              ○High = Red

Step 5: To power off, push and hold down button until light goes out.

 

 


Hot Tags: men's electric jacket, China, factory, cheap
Related Products